Custom Printed Ripple Cups
Ripple Paper Cups
Ripple Paper Cups
Custom Printed Ripple Cups

Ripple Wall Paper Cups | Custom Printed Coffee Cups 8-16oz

SYTAI ripple wall paper cups 8-16oz: triple-wall body holds 60-70C coffee, no sleeve. Custom printed ripple cups, 7 flexo colours, PE/PLA lining, 90mm lids, 500 pcs/ctn, MOQ 50,000.
Brand Name: SYTAI
Place of Origin: China
Type: Cup
Style: Ripple Wall
Material: Paper
Use: Beverage
Quantity
Minimum order quantity:50000pieces
Inquiry now
 

Ripple Wall Paper Cups | Custom Printed Ripple Cups 8-16oz

SYTAI supplies ripple paper cups in 8 oz, 10 oz, 12 oz and 16 oz — triple-wall corrugated
cups that hold 60–70 °C coffee while the outside stays at 38–42 °C, so no sleeve is needed. 
Produced in our own Wuhan plant since 2006,
these cups ship with custom printed ripple cups artwork in up to 7 flexo colours, kraft or white board, PE,
water-based or PLA lining, and matching 80 mm / 90 mm lids. MOQ is 50,000 pcs
per size and design, packed 500 pcs per carton.

Ripple Paper Cups: Why a Ripple Wall Keeps Coffee Hot Without a Sleeve

A ripple paper cups is built from three layers, not two. The inner layer is food-grade board with a PE,
water-based or PLA coating that touches the drink; the middle layer is a corrugated sheet formed into a continuous ripple;
the outer layer is the printed surface your customer holds. 
The corrugation traps a series of vertical air chambers between the drink and the hand,
so heat has to cross paper, air, paper and air before it reaches the palm.
That structure changes the serving calculation.
On a single-wall cup the exterior climbs past 65 °C within seconds of a hot fill and a sleeve becomes mandatory;
on a ripple wall cup the exterior sits at 38–42 °C, comfortable to hold for the full drink. 
SYTAI's ripple wall cups are specified at up to 50 % longer heat retention than single wall and
roughly 40 % better insulation than a flat double wall, with noticeably higher ring-crush
strength — important when cups are stacked high on a back bar or shipped in a 40HQ.

Custom Printed Ripple Cups: How Custom Coffee Cups Are Printed, Proofed and Packed

 
Custom coffee cups live or die on the print, and a ripple body is less forgiving than a flat wall. 
SYTAI prints ripple Paper cups by flexography, up to 7 colours, in CMYK or matched to your Pantone reference,
using water-based inks on kraft or white board. Because the outer layer is embossed,
artwork is adjusted before plate-making: very fine hairlines and small type set across the ripple crest tend to break up,
so our prepress team repositions those elements onto the flat bands and returns a revised file for approval.
Compliance information prints where your market expects it: recycling marks,
material abbreviation and lining type on the base or the side wall, positioned during design rather than added afterwards.
Cups are produced on lines holding ISO 9001/14001/18001, with LFGB, BV, SGS and FSC certification available for the paper.

Ripple Paper Cups Size

Size

Dimension

Packing Qty

Carton Dimension

4oz

62*45*60

1000

31.5*31.5*61

7oz

72*53*78

1000

59.5*37.5*46

8oz

80*56*92

500

41*33*44

8oz-B

90*58*86

500

46*37*33.5

10OZ

90*60*95

500

46*37*39

10oz-B

90*60*100

500

46*37*39

12OZ

90*60*110

500

46*37*46

16OZ

90*60*132

500

46*37*53

20OZ

90*60*152

500

46*37*59

220Z

90*60*168

500

46*37*65

 

Custom Printed Ripple Cups:FQA

What is the real difference between custom printed ripple cups and double wall cups? 
Double wall is two flat layers with one air gap — good insulation, smooth surface, mid price. 
Ripple wall adds a corrugated layer that creates multiple small air chambers: better insulation,
higher rigidity, a ribbed grip, and a print surface that has to be artwork-adjusted.
If you serve at peak hours and want to drop sleeves entirely,
ripple is the cheaper route once sleeve cost is counted.
Do the 8 oz, 12 oz and 16 oz cups use the same lid?
The 10 oz, 12 oz and 16 oz cups share a 90 mm rim, so one lid SKU covers all three. 
The 8 oz cup uses an 80 mm body on the current specification sheet and needs the
matching 80 mm lid confirmed before you order lids in volume.
Can I mix sizes in one container? 
Yes. Mixed-size containers are standard for ripple wall orders,
and running several sizes in one print job lets part of the plate cost be shared.
MOQ still applies per size and per design.
Which lining should I choose for the EU or US market? 
PE is the lowest-cost moisture barrier and the default for hot coffee.
Water-based coating is plastic-free and repulpable, which suits brands facing packaging-waste rules. 
PLA is plant-based and industrially compostable to EN 13432,
the option most often requested by chains with a published sustainability target.
Recycling marks and lining information can be printed on the cup on request.
 

1. Do you have your own factory?

Yes, we are a professional manufacturer. We own a factory in Wuhan City, Hubei Province. Established in 2006, our facility has a massive annual production capacity of over 9 billion pieces.

2. Can I get a sample before placing a bulk order?

Absolutely. We understand the importance of quality control. We have a range of quality samples available with different techniques applied for your reference. You only need to pay the shipping cost to receive them, and we ship to all countries.


3. What can you buy from us?

We offer a comprehensive range of disposable tableware and packaging solutions, including:

  • Paper Cups & Paper Bowls.

  • Paper Bags.

  • Drinking Straws.

  • Paper Plates

  • Paper Raw Materials.

  • Paper Plates

  • Sugarcane (Bagasse) Tableware.

  • Disposable Cutlery

  • Paper Raw Materials

  • Lids and more.


4. Why should you buy from us instead of other suppliers?

You should choose us because of our advanced manufacturing capabilities and strict quality control. Our factory is equipped with:

  • Corrugated Paper Machine.

  • PE and PLA Coating Machines.

  • Printing Machines (capable of up to 7 colors).

  • 100 High-Speed Forming Machines operating in controlled dust-free environments

  • Furthermore, we hold international certifications to guarantee our quality and reliability, including ISO 9001/14001/18001, LFGB, BV, SGS, and FSC certificates.

5. Can you print my logo on your paper packaging containers?

Yes, we offer custom printing services. Please notify us formally before production begins. We will first confirm the design and create a sample for your approval to ensure it meets your expectations.

6.What materials are used to produce your products?

We primarily use food-grade materials, including virgin paperboard with PE coating for waterproofing, as well as environmentally friendly PLA (cornstarch) coating. We also offer sugarcane (bagasse) pulp products. All materials are safe for direct food contact.

7.Are your products environmentally friendly or compostable?

Yes, sustainability is a key focus for us. We offer multiple eco-friendly options

  • Paper products are made from renewable resources and are recyclable.

  • PLA coated products are industrially compostable.

  • Sugarcane (Bagasse) products are made from 100% natural agricultural fiber and are both compostable and microwave-safe.

    Our FSC certification ensures our paper comes from responsibly managed forests.


Do you provide OEM (Original Equipment Manufacturer) service?

Yes, we strongly support OEM. We can customize not only the logo printing but also the product size, shape, and even packaging design to meet your specific brand needs. Just share your ideas or drawings with us.

FAQ

Recommended Products